Support

Product: Display Layout Switcher (Stream Deck plugin for Windows) · Provider: GRAMSHIFT (Tokyo, Japan)

Product page: Display Layout Switcher · Get it on the Elgato Marketplace

Contact

Email contact@gramshift.com in English or Japanese. We reply within 7 business days, usually sooner. Please include your Windows version, your Stream Deck app version, your graphics card, how your monitors are connected (for example two by DisplayPort, one TV by HDMI), and a photo or screenshot of the key and of its settings (the Status line says what Windows answered).

Save a layout

  1. Install the plugin from the Elgato Marketplace. In the Stream Deck app, find Display Layout Switcher in the action list and drag Save Profile onto a key.
  2. Arrange your monitors the way you want in Windows (Settings > System > Display): which monitors are on, where they are, resolution, refresh rate, rotation, HDR, and the main (primary) display.
  3. Give the key a Layout name, for example Desk, and press it. The key shows SAVED. To save over a layout with the same name, press the key twice (the first press only asks, AGAIN).
  4. Do the same for your other layouts (for example Game with only the fast monitor on, or TV).

Switch to a layout

  1. Drag Switch Profile onto a key and pick the Layout. A key whose layout is in use has a green frame and says ACTIVE.
  2. Press the key twice: the first press only asks (AGAIN, blue), so a stray press changes nothing. You can set Press to once in the key's settings.
  3. The layout changes, and the key counts down 15 seconds: KEEP?. Press the key once more to keep the new layout. It is then also saved in Windows' own display settings.
  4. If you do not press it in time, the previous layout comes back by itself (REVERTED). This is on purpose: if a monitor stays black after a change (for example a refresh rate it does not accept), you can still see the key, or simply wait.

Cycle Profiles works the same way and goes to the next of the layouts you check, after the one in use. Set Primary makes the chosen monitor the primary display and keeps the monitors' places relative to each other.

Change the projection like Windows + P

  1. Drag Set Projection onto a key and pick the Projection: PC screen only, Duplicate, Extend (the default) or Second screen only, the same four choices as the Windows + P menu. No saved layout is needed.
  2. Press the key twice, then once more within 15 seconds to keep it, as with Switch Profile. If you do not, the previous layout comes back by itself, even if the screen went black.

Windows uses the last layout of that kind it remembers (for example your last extended layout). The key shows a green frame and ACTIVE when the screens are in that mode. Duplicate, Extend and Second screen only need two connected displays; with one, the key shows REFUSED needs 2 displays and nothing changes. On a desktop PC without a laptop panel, Windows decides which screen counts as the "PC screen"; there PC screen only and Second screen only show ACTIVE while the one screen that key last set is in use. After a change made with Win+P or Windows Settings they may not show it; when Second screen only leaves several screens on, Extend shows ACTIVE.

Turn one display off and on

  1. Drag Toggle Display onto a key and pick the Display. The list shows every connected monitor, also one that is off now.
  2. The key shows ON (green frame) or OFF. Press it twice, then once more within 15 seconds to keep the change.
  3. Turning a display off keeps the others where they are. If it was in the middle, the one beside it moves into the gap; if it was the primary display, the nearest one becomes primary. Turning it on again brings the whole layout back as it was, the primary display included. If you changed the other screens while it was off, they stay as they are and it goes back to its old place (if that place is free; otherwise to the right of the others). Plugged into another port, the monitor is still found, unless an identical model is connected too and the plugin cannot tell which one is yours: then the key shows MISSING, nothing changes, and you pick the monitor on the key again. A monitor this plugin never turned off goes where a saved layout has it (if that place is free; otherwise to the right of the others), or, in no saved layout, at its own preferred resolution to the right of the others.

In the key's settings, Action can also be only turns it off or only turns it on (useful with one key for each). The only display in use cannot be turned off (REFUSED last display).

Change the refresh rate

  1. Drag Refresh Rate onto a key and pick the Display (Primary display follows whichever monitor is primary now). The key shows the rate in use, for example 144 Hz.
  2. Action next rate (the default) goes to the next rate on each press. Under Rates to go through you can tick only the rates you want, for example 60 and 144; with none ticked, it goes through every rate. set one rate always goes to the one rate you pick, and shows ACTIVE while the monitor runs at it.
  3. Only the rates the monitor offers at its current resolution and rotation are listed, with the decimals of the rate in use (for example 59.94). The resolution stays as it is. Screens in Duplicate (mirror) show the same picture and share one refresh rate, so they change together.
  4. One press changes the rate (set Press to twice if you want the first press to ask). The key then counts down 15 seconds: press it once more to keep the new rate, or wait and the previous rate comes back by itself, even if the screen went black.

If the rate in use cannot be read, the key is red and says not readable, and a press changes nothing. If set one rate has no rate picked yet, the key turns red and says pick a rate, and nothing is sent. If the rate picked for set one rate is not offered now (for example after a resolution change), the key is red and says so, and a press sends nothing.

Turn HDR on and off

  1. Drag HDR onto a key and pick the Display. The key shows HDR ON (green frame) or OFF. This is the "Use HDR" switch of Windows Settings > System > Display.
  2. A press switches it at once (no countdown: press again to switch it back). Action can also be only turns it on or only turns it off.

A monitor without HDR, or one for which Windows does not offer HDR now, shows HDR -- and a press sends nothing. If the HDR state cannot be read, the key is red and a press changes nothing. If HDR did not end up as asked, the plugin puts it back as it was and the key says so.

Stream Deck + dial

Put Refresh Rate on a dial of a Stream Deck +. The touch strip shows the monitor and its rate.

Key picture: the layout diagram

Save Profile, Switch Profile and Cycle Profiles keys have a Key picture setting. Layout diagram draws the saved layout on the key: each monitor at its place and size, the primary display in blue with its taskbar, a monitor that is not connected now as a dashed red outline. Name and status (the default) is the picture of version 1.0, so keys you set up before look the same until you change it.

Only one change at a time: while a key counts down, the other keys of this plugin show WAIT, and pressing them only shows the warning triangle. Only the key that made the change can keep it.

What the key shows

KeyMeaning
Green frame, ACTIVE / PRIMARYThis layout or projection is in use / this monitor is the primary display.
Green frame, ON / gray, OFF (Toggle Display)The monitor is on / off now. The bottom line says what a press does.
Blue, AGAINFirst press: press again within 3 seconds to go ahead.
Blue, KEEP? and a numberThe new layout is on. Press within that many seconds to keep it.
Green, KEPTKept and saved in Windows.
Gray, REVERTEDNot kept in time; the previous layout is back.
Red, MISSINGA monitor of this layout is not connected (its name is shown). Nothing was changed: the plugin never applies half a layout.
Red, REFUSED and a codeWindows checked the layout and refused it before anything changed. Usually a monitor no longer offers a saved resolution or refresh rate (for example after a driver update or with another cable). Save the layout again.
Red, FAILEDWindows could not apply the layout, applied something else than saved (another refresh rate), or refused HDR. The plugin went back to the previous layout at once; the second line says whether that worked.
Red, REFUSED needs 2 displays / last displaySet Projection with one display connected, or Toggle Display on the only display in use. Nothing was changed.
Rate and Hz, green frame ACTIVE (Refresh Rate)The rate in use; ACTIVE when it is the rate a set one rate key sets. The bottom line says where a press goes (→ 165 Hz).
Red, 144 Hz not offered (Refresh Rate)The monitor does not offer that rate at its resolution now. A press sends nothing.
HDR ON / OFF / --HDR is on / off / not available for this monitor now.
Red, not readableThe rate or the HDR state could not be read just now. A press changes nothing.
Gray, REMOVED nothing savedA monitor was unplugged during the countdown. The previous layout cannot come back without it, so Windows put back the layout it had saved for the screens still connected. Nothing was saved.
Red, could not go backRare: the previous layout could not be restored. Open Windows display settings (Win+P or Settings > System > Display).
Red, no accessWindows did not give the display layout (error 5). This happens on the lock screen and in some remote desktop sessions.

Common questions

Can I turn off my second monitor without saving a layout first?
Yes. Use a Toggle Display key for that monitor. Pressed again, the monitor comes back with the whole layout as it was, the primary display included, if you did not change the other screens meanwhile (if you did, they stay as they are and the monitor goes back to its place).

Is there a key for Win+P (Duplicate, Extend, PC screen only, Second screen only)?
Yes, Set Projection. Unlike Win+P it counts down 15 seconds after the change and goes back by itself unless you keep it.

Can one key switch my monitor between 60 Hz and 144 Hz?
Yes. Put Refresh Rate on a key, keep next rate and tick 60 and 144 under Rates to go through. Each press goes to the other rate; the change counts down 15 seconds and goes back by itself unless you keep it.

A rate I want is not in the list.
The list shows only what the monitor offers at its current resolution. A higher rate may need another resolution, another cable or port, or a setting in the monitor's own menu. Change it in Windows first; then it appears in the list.

Does it need administrator rights?
No. It uses Windows' own display functions, as your user, like the Windows Settings app.

A saved layout says MISSING although the monitor is on.
Layouts remember each monitor by the identifier Windows gives it, which includes the connector. A monitor on another port or through another dock may get a new identifier. If exactly one connected monitor has the same model and connector, or the same model alone, it is used; otherwise save the layout again.

Two identical monitors.
They are told apart by their Windows identifiers (connector), in saved layouts and on Toggle Display keys. When the monitor of a Toggle Display key is off or unplugged, the key shows it as not connected and does not switch the other one, once the plugin has seen both connected at the same time or they are in a saved layout together. If you swap their cables, save your layouts and pick the monitors on the Toggle Display keys again.

What is not restored?
Display scaling (the percentage), color profiles, night light and the brightness of a monitor are not part of a layout. Windows keeps them per monitor.

The plugin or the Stream Deck app was closed while a key counted down.
When the Stream Deck app closes, the plugin goes back to the previous layout first. If the plugin was ended abruptly, it goes back when it starts again, if that is within 2 minutes.

The keys show WAIT / starting, or Save shows FAILED "layouts not read".
When the plugin starts, it first reads its saved layouts from the Stream Deck app (and, if needed, brings back a layout it had not finished); until then a press does nothing. If the Stream Deck app does not give the saved layouts, the plugin does not save anything, because saving would replace, and so erase, the layouts saved before. Restart the Stream Deck app.

Does it work on Mac?
No. This plugin is for Windows 10 and 11 only.

Bought direct from GRAMSHIFT?

Enter your license key in the settings of any key. If it fails, email contact@gramshift.com.

Privacy

The plugin runs entirely on your PC and sends no data anywhere. See the Privacy Policy.